6 x 3/8″ (3.5 x 9.5mm) Round Hammer Drive Screws – A2 Stainless Steel
£0.04
Excluding VAT
SKU: 52006.035.095
- Recommended hole sizes:
Thin sheet metal, non-ferrous castings, plastics etc.: 3.10mm
Cast iron, thick sheet metal: 3.30mm - Core Diameter: 2.9mm
- Head Diameter: 6.6mm
- Head Height: 2.62mm
- Hammer drive screws consist of a round or flat head and a shaft with coarse helical knurling
- Simply driven into a pre-sized hole by hammer or with a press
- The knurls grip the inside of the hole and resist rotational loosening
- Used as a permanent, tamper resistant fixing where the need to remove the pin is unlikely
- Simple, low-cost assembly, often used to attach plate materials to unhardened metals
- Unlike machine screws, do not depend on a tightening torque to be retained in the assembly
- Resistant to back-out, without the need for lock washers
- Manufactured from stainless steel to resist corrosion
Available
- Hammer drive screws consist of a round or flat head and a shaft with coarse helical knurling
- Simply driven into a pre-sized hole by hammer or with a press
- The knurls grip the inside of the hole and resist rotational loosening
- Used as a permanent, tamper resistant fixing where the need to remove the pin is unlikely
- Simple, low-cost assembly, often used to attach plate materials to unhardened metals
- Unlike machine screws, do not depend on a tightening torque to be retained in the assembly
- Resistant to back-out, without the need for lock washers
- Manufactured from stainless steel to resist corrosion