2 x 3/16″ (2.5 x 4.5mm) Round Hammer Drive Screws – A2 Stainless Steel
£0.08
Excluding VAT
SKU: 52006.025.045
- Recommended hole sizes:
Thin sheet metal, non-ferrous castings, plastics etc.: 2.20mm
Cast iron, thick sheet metal: 2.30mm - Core Diameter: 2.1mm
- Head Diameter: 4.1mm
- Head Height: 1.75mm
- Hammer drive screws consist of a round or flat head and a shaft with coarse helical knurling
- Simply driven into a pre-sized hole by hammer or with a press
- The knurls grip the inside of the hole and resist rotational loosening
- Used as a permanent, tamper resistant fixing where the need to remove the pin is unlikely
- Simple, low-cost assembly, often used to attach plate materials to unhardened metals
- Unlike machine screws, do not depend on a tightening torque to be retained in the assembly
- Resistant to back-out, without the need for lock washers
- Manufactured from stainless steel to resist corrosion
Available
- Hammer drive screws consist of a round or flat head and a shaft with coarse helical knurling
- Simply driven into a pre-sized hole by hammer or with a press
- The knurls grip the inside of the hole and resist rotational loosening
- Used as a permanent, tamper resistant fixing where the need to remove the pin is unlikely
- Simple, low-cost assembly, often used to attach plate materials to unhardened metals
- Unlike machine screws, do not depend on a tightening torque to be retained in the assembly
- Resistant to back-out, without the need for lock washers
- Manufactured from stainless steel to resist corrosion