Basin Wrenches & Keys
Showing 1–25 of 62 results
Image | Product Code | Name | Info | Volume Discount | Quantity Add to Cart |
---|---|---|---|---|---|
MON2166 | Monument 2166M TRV Tail Driver Fitting Socket MON2166 | ||||
The Monument 2166M TRV Tail Driver Fitting Socket has been designed to enable fast removal and installation of radiator valve tails and will fit most makes and sizes. The socket can be used with a either a cordless drill chuck or ratchet with 10mm hex socket. |
|||||
MON2580 | Monument 2580U Vent Sizing Gauge 5 – 10mm MON2580 | ||||
The Monument 2580U Vent Sizing Gauge is used to measure the size of the slots in an air vent to calculate the area of ventilation provided by a vent where this info is not readily available. The gauge is stepped in increments of 1mm and will measure vent slots from 5mm up to 10mm. Made from stainless steel. |
|||||
MON341 | Monument 341J Adjustable 2 Jaw Basin Wrench – DIY MON341 | ||||
Monument Adjustable Fitted 2 Jaw Wrench (DIY) is an adjustable basin wrench for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths. The teeth on the jaws will grip uneven shapes as well as pipes, hexagons, squares etc. The swivelling head allows access where fixed spanners will not operate. Round cross section steel handle with removable tommy bar. Size: 15 and 22mm (1/2 and 3/4 in). |
|||||
KPX001101 | Knipex TwinKey? Service Cabinet Key KPX001101 | ||||
The Knipex 00 11 01 TwinKey® Service Cabinet Key is designed for the actuation of locking systems from the areas of facilities engineering (heating and sanitation, air conditioning, electro technology), gas and water supply and shut-off-systems. Consists of two 4-way spider keys connected using magnets providing space saving storage. It has a weight-optimised, zinc die-cast design. It has the following functions: 4 x Square: 5, 6-7, 8-9 & 10-11mm. |
|||||
RID31405 | RIDGID 342 Internal Wrench 25-50mm Capacity 31405 RID31405 | ||||
The RIDGID 342 Internal Wrench holds closet spuds and bath, basin and sink strainers. They can also be used to install or extract Schedule 40 nipples. The jaws expand via an eccentric action and are reversible for various sizes. |
|||||
RID31305 | RIDGID E110 Offset Hex Wrench 29-67mm Capacity 240mm 31305 RID31305 | ||||
The RIDGID E110 Offset Hex Wrench design gives multi-sided, secure grip on all hex nuts, square nuts, unions and valve packing nuts. The extra-wide opening is ideal for securing drain nuts on sinks and tubs and the thin, smooth jaws slip into the tightest places. Specification Size: 240mm (9 1/2in). |
|||||
MON781 | Monument 781T DIY Telescopic Plumbing Basin Wrench MON781 | ||||
This Monument 781T DIY telescopic adjustable basin wrench is designed for use when tightening or loosening nuts in awkward positions, particularly those underneath basins or baths. The teeth on the jaws will grip uneven shapes as well as pipes, hexagons, squares etc. The swivelling head allows access where fixed spanners will not operate. Extends from 25 – 43cm |
|||||
MON4562 | Monument 4562P Grip+ T2 Two Triple Step 8-13mm Monobloc Spanner Hex Fittings MON4562 | ||||
The Monument 4562P GRIP+ is a pair of stepped 8, 9 and 10mm & 11, 12 and 13mm Nickel Plated Hexagonal Fittings. They can be connected to the Monument 3240U and the 4537G GRIP+ shorty swivel handle, extending the reach of the Monument 3240U box spanners, for easier access to Monobloc tap back nuts. |
|||||
MON4537 | Monument 44537G Grip+ Shorty Handle MON4537 | ||||
The Monument 4537G GRIP+ Shorty Handle fits Monument GRIP+ Sockets and Tools for back nut box spanners, radiator valves, taps, pumps and cabinets allowing improved access. It is the innovative advancement to the best selling Professional Adjustable Basin Wrench MON345. The unique shape of the swivelling head has additional sockets and tools to fit many radiator valves, back nut box spanners, taps, pumps and cabinets. Originally conceived by Arthur Collier in 1958 and still……Made in Britain. |
|||||
MON4534 | Monument 4534X Grip+ T1 27mm x 32mm Hex Fitting for Box Spanner MON4534 | ||||
The Monument 4534X GRIP+ T1 is a 27x32mm double-ended nickel plated hexagonal fitting tool. Fits most radiator valves, back nut box spanners, taps, pumps and cabinets. Use with the Monument 323F Tap Back Nut Box spanner. When connected to the box spanner, the Monument 4537G GRIP+ shorty swivel handle or the Monument 345V adjustable basin wrench handle, it extends the reach for easier access. Made in Britain. |
|||||
MON4527 | Monument 4527C Grip+ T6 Three Pin Sink Rose Tool MON4527 | ||||
The Monument 4527C GRIP+ T6 Three Pin Sink Rose Tool is for holding a sink strainer rose in position whilst tightening and loosening nut. Used with the MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain. |
|||||
MON4508 | Monument 4508A Grip+ T7 3-Prong Gate Valve Tool MON4508 | ||||
The Monument 4508A GRIP+ T7 3-Prong Gate Valve Tool is for closing and opening damaged gate valves. Use with the MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain. |
|||||
MON4507 | Monument 4507X Grip+ R1 Radiator TRV Tail Fitting Tool MON4507 | ||||
The Monument 4507X GRIP+ R1 Radiator Thermostatic Radiator Valve Tail Fitting Tool with 16mm internal hex. Fits most radiator valves. Use with MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain. |
|||||
MON4501 | Monument 4501F Grip+ R2 3-Stepped Radiator Valve Tool MON4501 | ||||
The Monument 4501F GRIP+ R2 3-Stepped Radiator Valve Tool fits most radiator end caps and valves. The 3-stepped tool has the following sizes: 10mm & 12mm Slotted and 1/2in A/F Hex. Use with MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access.
|
|||||
MON361 | Monument 361T Box Ring Immersion Heater Spanner MON361 | ||||
The Monument 361T Box Ring Immersion Heater Spanner is made with an octagon at the base of the cylindrical section to enable really tight immersion heaters to be loosened by striking the handle. The one-piece casting enables full transmission of power to the spanner unlike loose tommy bar types. Overall clearance around the spanner is 7/8in (22mm) allowing easier fitting on insulated copper cylinders. Made in Britain. |
|||||
MON358 | Monument 358J Deep Box Immersion Spanner MON358 | ||||
The Monument 358J Deep Box Immersion Spanner has an octagonal box ring at the base of a steel cylinder. The deep box design allows easy access to heaters that are surrounded by insulation or recessed. Supplied with a separate tommy bar. |
|||||
MON339 | Monument 339C Mains Water Tapered Stopcock Key 1050mm (42in) MON339 | ||||
The Monument 339C Mains Water Tapered Stopcock Key is used primarily for turning on and off external 1/2 5/8 and 3/4in Crutch stopcocks which can be difficult to reach. The turning handle has one chisel end for lifting covers and has a painted finish. |
|||||
MON331 | Monument 3331E Crutch End Domestic Stopcock Key MON331 | ||||
The Monument 331E Crutch End Domestic Stopcock Key has been designed for turning on and off hard-to-reach or difficult stopcocks, such as under kitchen units, sinks and stiff to turn outside taps. The design provides increased leverage and is supplied with a removable tommy bar in hexagon shaft. This allows it to connect to a socket and ratchet handle for ease of use in difficult corners. |
|||||
MON327 | Monument 327R Heavy-Duty Basin Wrench 1/2in & 3/4in MON327 | ||||
This Monument Basin Wrench is used for fitting back nuts and union nuts of pillar and bath taps behind basins, sinks and baths. They are manufactured from strong malleable material and have correctly machined jaws to fit standard nuts 15mm and 22mm. The offset design allows you to reach behind sinks & baths easily Overall Length: 260mm |
|||||
MON3240 | Monument 3240U Mono Tap Backnut Spanner Set & T-bar Grip MON3240 | ||||
Monument GRIP+ Mono Tap Backnut Spanner Set is a set of 3 double-ended tap back nut box spanners for quick assembly of tap backnuts on basins. Supplied with T-bar. The set comprises the following sizes: 8 x 10, 9 x 11 and 12 x 13mm. |
|||||
MON323 | Monument 323F Tap Backnut Box Spanner Grip+ MON323 | ||||
The Monument GRIP+ 323F Tap Backnut Box Spanner is double-ended for the quick assembly of tap backnuts on basins. Part of the GRIP+ range. Size: 27 and 32mm. |