Torx Pan Thread Forming Screws for Plastics Black Passivated
Showing 1–25 of 55 results
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Black Passivated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
Image | Product Code | Name | Info | Volume Discount | Quantity Add to Cart |
---|---|---|---|---|---|
51156.220.050 | 2.2 x 5mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.220.060 | 2.2 x 6mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.220.080 | 2.2 x 8mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.220.100 | 2.2 x 10mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.250.050 | 2.5 x 5mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.250.060 | 2.5 x 6mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.250.080 | 2.5 x 8mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.250.100 | 2.5 x 10mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.250.120 | 2.5 x 12mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.250.160 | 2.5 x 16mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.030.006 | 3.0 x 6mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.030.008 | 3.0 x 8mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.030.010 | 3.0 x 10mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.035.025 | 3.5 x 25mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.035.030 | 3.5 x 30mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.030.012 | 3.0 x 12mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.030.014 | 3.0 x 14mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.035.035 | 3.5 x 35mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.040.008 | 4.0 x 8mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.040.012 | 4.0 x 12mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.040.010 | 4.0 x 10mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.040.014 | 4.0 x 14mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.035.040 | 3.5 x 40mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.040.018 | 4.0 x 18mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
| |||||
51156.040.025 | 4.0 x 25mm Torx Pan Thread Forming Screws for Plastics – Black Passivated | ||||
|