Torx Flange Thread Forming Screws for Plastics YZP
Showing 1–25 of 45 results
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Torx TX recess drive (star drive, multidrive, 6-lobe)
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
Image | Product Code | Name | Info | Volume Discount | Quantity Add to Cart |
---|---|---|---|---|---|
51153.220.005 | 2.2 x 5mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.220.006 | 2.2 x 6mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.220.010 | 2.2 x 10mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.025.006 | 2.5 x 6mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.025.008 | 2.5 x 8mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.025.010 | 2.5 x 10mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.030.006 | 3.0 x 6mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.030.008 | 3.0 x 8mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.030.010 | 3.0 x 10mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.030.012 | 3.0 x 12mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.030.014 | 3.0 x 14mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.030.016 | 3.0 x 16mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.030.018 | 3.0 x 18mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.030.020 | 3.0 x 20mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.035.008 | 3.5 x 8mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.035.010 | 3.5 x 10mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.050.012 | 5.0 x 12mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.035.012 | 3.5 x 12mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.050.014 | 5.0 x 14mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.050.018 | 5.0 x 18mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.050.016 | 5.0 x 16mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.050.025 | 5.0 x 25mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.050.020 | 5.0 x 20mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.050.030 | 5.0 x 30mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51153.060.020 | 6.0 x 20mm TORX Flanged Head Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|