Pozi Flange Thread Forming Screws for Plastics YZP
Showing 1–25 of 36 results
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Flange head provides a larger bearing surface ideal for softer materials
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
Image | Product Code | Name | Info | Volume Discount | Quantity Add to Cart |
---|---|---|---|---|---|
51147.220.005 | 2.2 x 5mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.040.001 | 2.2 x 6mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.220.008 | 2.2 x 8mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.220.010 | 2.2 x 10mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.250.005 | 2.5 x 5mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.250.006 | 2.5 x 6mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.250.008 | 2.5 x 8mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.250.010 | 2.5 x 10mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.250.012 | 2.5 x 12mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.030.006 | 3.0 x 6mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.030.008 | 3.0 x 8mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.030.010 | 3.0 x 10mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.030.012 | 3.0 x 12mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.030.016 | 3.0 x 16mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.030.020 | 3.0 x 20mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.350.001 | 3.5 x 8mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.035.010 | 3.5 x 10mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.035.012 | 3.5 x 12mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.035.014 | 3.5 x 14mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.035.016 | 3.5 x 16mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.035.020 | 3.5 x 20mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.035.025 | 3.5 x 25mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.040.002 | 4.0 x 8mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.040.010 | 4.0 x 10mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|
|||||
51147.040.012 | 4.0 x 12mm Pozi Flange Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|