Pozi CSK Thread Forming Screws for Plastics YZP
Showing 1–25 of 29 results
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow zinc plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
- Thread-forming screws for use in thermoplastic materials
- The thread is formed by displacing material, not by cutting it
- Ideal for insertion into drilled or moulded holes
- 30 degree thread flank angle reduces installation torque and stress induced in plastic
- Case hardened steel, Yellow Zinc Plated and waxed
- Pozidriv PZ recess drive
- Hard plastics use: polycarbonate, modified PPO. Soft plastics: ABS, nylon
- See ‘Technical Data’ for dimensions and recommended pilot hole diameters (soft plastics require smaller diameter, hard plastics require larger diameter)
Image | Product Code | Name | Info | Volume Discount | Quantity Add to Cart |
---|---|---|---|---|---|
51145.025.050 | 2.5 x 5mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.025.060 | 2.5 x 6mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.025.080 | 2.5 x 8mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.025.010 | 2.5 x 10mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.025.012 | 2.5 x 12mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.030.001 | 3.0 x 20mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.025.016 | 2.5 x 16mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.030.025 | 3.0 x 25mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.030.060 | 3.0 x 6mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.035.080 | 3.5 x 8mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.035.012 | 3.5 x 12mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.040.012 | 4.0 x 12mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.035.016 | 3.5 x 16mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.040.016 | 4.0 x 16mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.030.080 | 3.0 x 8mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.040.020 | 4.0 x 20mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.040.025 | 4.0 x 25mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.035.020 | 3.5 x 20mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.040.030 | 4.0 x 30mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.035.025 | 3.5 x 25mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.050.012 | 5.0 x 12mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.050.016 | 5.0 x 16mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.040.010 | 4.0 x 10mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.050.020 | 5.0 x 20mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
| |||||
51145.030.010 | 3.0 x 10mm Pozi CSK Thread Forming Screws for Plastics – Yellow Zinc Plated | ||||
|