M4 x 11.5mm Steel Reduced Head, Round Knurled Body Rivet Nuts, Grip range 0.5 – 2.0mm, Hole Size 6.1mm
£0.03 - £0.04
Excluding VAT (If price is per 100, you can still order any quantity)
SKU: 51074.040.001
Grip Range: 0.5 – 2.0mm
Internal thread size: M4 x 0.7mm pitch
Drill/hole diameter: 6.0mm
Body Diameter: 5.9mm (Drill Size:6.0mm)
Head Diameter: 7mm
Head Height: 1.5mm
Available
- Cost effective method of installing a full depth thread in thin sheet materials
- Holes may be drilled or punched and for best results 0.1mm larger than the rivet nut body
- Installed blind (from one side) allows setting in box sections, tube and tight corners
- The low profile head gives a near flush finish without the need for countersinking
- Also known as reduced head rivet nuts
- Steel, zinc plated
- The grooved or splined body gives improved torque values particularly in softer materials
- Sizes shown are thread size x original length
- Grip range: Minimum and maximum material thickness into which the nut can be set